3-1-4 Backlight Mode Setting
The default setting is “ AUTO ” ( The auto backlight is on)
Auto backlight When there is weight on the platter (the value is larger than
10 divisions), or when any key is pressed, the backlight is on.
After the weight on the platter keeps under 10 divisions while
no key is pressed, the backlight will be off in about 10
seconds.
Use the or the / key to select
one from three backlight modes.
Press the key to confirm the setting.
Backlight is off
Auto backlight
Backlight is on all the time
To Next Page
Loading...
Need help?
General
