To Next PageTo Next Page
Need help?Do you have a question about the Excell EPW1792500 and is the answer not in the manual?
General| Brand | Excell |
|---|---|
| Model | EPW1792500 |
| Category | Pressure Washer |
| Language | English |
Explains DANGER, WARNING, CAUTION, NOTICE symbols used in the manual.
Warns about chemicals known to cause cancer, birth defects, or reproductive harm.
Details hazards related to gasoline vapors, fuel expansion, and operating in explosive environments.
Warns about dangers of engine exhaust fumes containing carbon monoxide.
Explains high-pressure fluid hazards and proper handling of hoses and fittings.
Covers hazards of high-velocity spray and projectile risks.
Addresses hazards related to fuel leaks and proper storage procedures.
Warns about burns from contact with hot engine components like the exhaust.
Details dangers of using incompatible chemicals and need for protective clothing.
Alerts to the danger of spraying electrical outlets or circuits.
Advises on the weight of the pressure washer and the need for assistance.
Explains the function of the thermal relief valve in preventing pump overheating.
Describes the automatic engine shutdown feature due to low oil levels.
Details the trigger safety latch to prevent accidental discharge.
Discusses the requirement and function of a spark arresting muffler for flammable areas.
Instructions for attaching the wheel axle and wheels to the unit.
Steps for assembling the rubber feet using screws and nuts.
Guide for attaching the handle to the main frame with bolts and knobs.
Instructions for attaching the lower gun hook with screw and nut.
Steps for assembling the upper gun hook using screw and nut.
Details on attaching the hose hanger using screws and nuts.
Describes the five different spray nozzles and their uses.
Checklist for checking loose parts, damage, and general readiness before operation.
Guidance on connecting the hose and gun securely to prevent leaks.
Emphasizes filling the engine crankcase with the correct oil before starting.
Details on using clean unleaded gasoline and proper filling levels to avoid overflow.
Labels key engine and pump parts like fuel fill, air filter, throttle, etc.
Instructions for connecting the high-pressure hose to the pump outlet.
Steps for connecting the garden hose to the pump inlet and water supply requirements.
Steps for connecting water, releasing safety, and purging air from the hose.
Guide on checking oil/fuel, using choke, and pulling the starter rope correctly.
How to attach the injection tube, select chemicals, and use the system.
Method for applying detergents to dry surfaces for effective cleaning.
Instructions for applying wax after cleaning for protection and finish.
Procedures for rinsing the unit and cleaning the chemical injection system.
Importance of cleaning and lubricating hose, gun, and wand connections.
Steps for clearing a clogged nozzle to restore proper pressure and cleaning.
How to clean the water inlet screen to maintain water flow and protect the pump.
Refers to the engine manufacturer's manual for engine-specific service.
Procedure for storing the pump with antifreeze to prevent freeze damage.
Instructions for draining fuel, oiling cylinder, and proper storage of the engine.
Advice on using fuel stabilizer to prevent gum deposits during storage.
Outlines the terms, conditions, and limitations of the manufacturer's warranty.
Provides address and phone number for warranty inquiries and assistance.
Solutions for problems like engine not starting, stopping, or overloading.
Troubleshooting for pressure increases, low pressure, or irregular pressure.
Addresses issues like water/oil leaks, noisy operation, and water in crankcase.
Solutions for chemical intake problems and high crankcase temperatures.
