Chapter 2 Operation
Tare
Place the object on the weigh pan
When the weight stable, press
to deduct the weight and tare
indication“” shows on.
Remove the object and press
to clear the tare value and tare
indication “” goes off.
Tare continuously: Press key, when weight is added or deducted on weigh pan.
Tare value = the full capacity (the scale can be tared continuously to the full capacity)
Net value / Gross value
In tare mode, tare indication “” shows on
Press to show the gross value,
and tare indication “” goes off
Press again to show the net value
and tare indication “” shows again.
The key is functional ONLY in tare mode.
Counting Function
Use to enter the counting mode.
Pcs indication “” shows on.
Press to select the counting sample
size (10,20,50,100,200)
Place the samples on the weigh pan,
and then press
After the weight is stable, the display
shows the quantity of the samples.
To Next Page
Loading...
Need help?
General
