23
STORAGE
For your convenience, the bike can be folded up for storage when NOT in use.
1. Adjust the Desk (88) height to the lowest position.
2. Adjust the Desk (88) angle up to the 33 Degree position.
3. Slide the Desk (88) to the furthest forward position.
4. Slide the Seat Bracket (5) all the way back.
5. Remove the Safety Pin (22).
6. Push the Rear and Front Frames (1, 2) together.
7. Align the Storage pin holes on the Rear and Front Frames (1, 2), and insert the Safety Pin
(22) into the lower pin hole to keep both sides of the frame in place.
8. Attach the Rear Frame Support Tube (67) onto the Tube Clip (113).
To Next Page
Loading...
