15
a more upright position; lowering them will result in a
more prone position.
2. Raise or lower the handlebars by loosening the handlebar post adjustment and sliding the handlebar
post up or down as desired. Tighten the adjustment knob to secure the handlebar post.
1. Inspect all the Nuts, Bolts, and Nut Caps regularly. Tighten when necessary prior to usage.
2. Perform periodic inspection on the Clamp Brake Assembly (60). Replace worn-out brake pads or
assembly.
3. Pedals can become loose after certain period of time of usage. Make sure pedals are properly
tightened by following the procedure on page 13. Operating the bike on loose pedals will lead to
improper wear and tear on the crank.
4. Loose Seat (63) can be adjusted by using the opening spanner.
5. DO NOT use the bike with any manufacturing defects, please contact manufacturer authorized
customer service at (888) 922-2336 immediately.
6. Parts with excessive wear and tear need to be replaced immediately prior to usage.
To Next Page
Loading...