CD42CD/CD48CD
SetupInstructions
ForSerialNos.850,000&Higher
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.Partnumbersnotshownareavailableonthedealer
extranet.
DealerPack
Part#
DescriptionQty.Use
—WarrantyRegistrationReminder
Fillouttheonlinewarrantyregistration
form.
LiteraturePack
Part#
DescriptionQty.Use
—
Manual,Operator’s
1
—Manual,Parts1
Readbeforeoperatingthemachine.
WARNING
OperatingaNavigatortractorwithoutan
approvedExmarkfrontmountattachment
increasesthepossibilityofoperator
entanglementindrivewheelsorforwardtip
over.Entanglementortip-overcouldcause
seriousinjuryordeath.
WhenoperatingaNavigatortractorwithout
anapprovedExmarkfrontmountattachment,
observethefollowing:
•Keepfeetandclothingawayfromtires.
•Limitoperationtominimumrequiredto
installadifferentfrontmountattachment.
•Minimizespeedanduseextremecaution.
•Onlyoperateonaatlevelsurface.
•DoNotoperateupordownatrailerramp.
•Avoidsuddenaccelerationordeceleration.
UncratingtheUnit
1.Removetopandsidesofcratefrombase.
2.Removeathairpinsfromunderfrontframeand
discard(Figure1).
AssemblingtheDischargeChute
1.Locatethethreeholesattherearofthemowerdeck
shownin(Figure1)andremovethethree#10-24x
3/4inchtrussheadscrewsandthree#10-24inch
nylocnuts.
2.Assemblethedischargetubetothemowerdeckas
shownusingthehardwareremovedinstep1,with
thehingepositionedontopofmowerdeck.
3.Locatethedischargetubespringonthemowerdeck
andhookontothedischargetubespringbracket
(Figure1).
©2009—ExmarkMfg.Co.,Inc.
P .O.Box808
Beatrice,NE68310
PartNo.4500-597Rev.A
PrintedintheUSA
AllRightsReserved