Exmark CD42CD User Manual

For Serial Nos.
510,000 & Higher
Part No. 103-8614 Rev. A

Exmark CD42CD Specifications

General

Drive Type	Hydrostatic
Deck Type	Fabricated
Cutting Width	42 inches
Weight	505 lbs
Engine Brand	Kohler
Turning Radius	18 inches

Summary

Exmark Parts Plus Program

How the Program Works

Explains the steps and rules for the Exmark Parts Plus program.

General Safety Warnings

Potential Hazards and How to Avoid Them

Covers potential hazards of power equipment and how to avoid them.

Operator's Manual Introduction

Importance of Reading the Manual

Emphasizes reading the manual for proper operation and maintenance.

Safety Guidelines

Safety Alert Symbol and Training

Explains safety symbols and operator training requirements.

Operation and Maintenance Safety

Preparation and Operation Safety

Details pre-operation checks, safe operating practices, and hazard avoidance.

Maintenance and Storage

Outlines essential maintenance and storage practices.

Safety Signs and Labels

Specific Safety Sign Details

Identifies specific safety signs and their locations on the equipment.

Specifications

Model, Dimensions, and Torque

Lists model numbers, dimensions, and torque requirements.

Assembly Instructions

Uncrate Deck

Instructions for uncrating the mower deck.

Assemble Discharge Chute

Steps for assembling the discharge chute to the mower deck.

Assemble Deck to Navigator

Guides the process of attaching the mower deck to the tractor.

Deck Removal Procedure

How to Remove the Mower Deck

Step-by-step instructions for safely removing the mower deck.

Deck Raising and Lowering

Raising the Deck to Service Position

Details the procedure for raising the mower deck.

Lowering the Deck to Operation Position

Details the procedure for lowering the mower deck.

Periodic Maintenance

Daily Maintenance Tasks

Outlines daily tasks like cleaning, checking blades, hardware, and tires.

Lubrication Schedule

Guidance on lubricating grease fittings as per schedule.

Gearbox and Caster Maintenance

Caster Wheel Hub Lubrication

Instructions for lubricating the caster wheel hub annually.

Gearbox Oil Change

Procedure for changing and checking gearbox oil levels.

Adjustments

Cutting Height Adjustment

Explains how to adjust the cutting height of the mower deck.

Deck Leveling

Steps to ensure the mower deck is level for optimal cutting.

Caster and Locking Pin Adjustments

Caster Pivot Bearing Adjustment

Details the adjustment for caster pivot bearing pre-load.

Deck Locking Pin Stop Adjustment

Instructions for adjusting the deck locking pin stops.

Parts List - Deck Group

Deck Group Parts Listing

Lists all parts for the mower deck assembly.

Parts List - Front Frame

Front Frame Group Parts Listing

Lists parts associated with the front frame assembly.

Parts List - Gearbox

Gearbox Components Listing

Details the components of the mower deck gearboxes.

Warranty Information

Warranty Coverage and Responsibilities

Details warranty terms, conditions, exclusions, and customer responsibilities.

Items Not Covered by Warranty

Specifies what is excluded from the warranty coverage.

General Warranty Conditions

Warranty Terms and Legal Rights

Provides general terms and conditions of the warranty.

Accessories

Riding Accessories

Lists available accessories for riding mower applications.

Walk Behind Accessories

Lists available accessories for walk-behind mower applications.