Exmark Laser Z XS User Manual (English)

Questions and Answers:

T
Tiffany StewartSep 6, 2025
What to do if my Exmark Lawn Mower does not drive?
- J
  Jason LopezSep 6, 2025
  If your Exmark Lawn Mower doesn't drive, it might be due to: 1. The bypass valve not being closed tight. Tighten the bypass valve. 2. A worn, loose, or broken drive or pump belt. Change the belt. 3. The drive or pump belt being off a pulley. Change the belt. 4. A broken or missing idler spring. Replace the spring. 5. Low or excessively hot hydraulic fluid level. Add hydraulic fluid to the reservoir or allow it to cool down.
T
Tara SnyderSep 7, 2025
Why is my Exmark Laser Z XS cutting height uneven?
- H
  hillmichaelSep 8, 2025
  If you notice an uneven cutting height with your Exmark Lawn Mower, check the following: 1. The blades may not be sharp. Sharpen the blades. 2. The cutting blades may be bent. Install new cutting blades. 3. The mower deck may not be level. Level the mower deck from side-to-side and front-to-rear. 4. The underside of the mower may be dirty. Clean the underside of the mower. 5. The tire pressure in the drive tires may not be correct. Adjust the tire pressure. 6. If the blade spindle is bent or the tips of adjacent blades are at an uneven cutting height, contact an Authorized Service Dealer.
C
Caroline RiveraSep 9, 2025
Why is my Exmark Laser Z XS vibrating abnormally?
- L
  Laura CampbellSep 9, 2025
  If you are experiencing abnormal vibration with your Exmark Lawn Mower, consider the following: 1. The cutting blades may be bent or unbalanced. Install new cutting blades. 2. The blade mounting bolt may be loose. Tighten the blade mounting bolt. 3. The engine mounting bolts may be loose. Tighten the engine mounting bolts. 4. A loose engine pulley, idler pulley, or blade pulley. Tighten the appropriate pulley. 5. If the engine pulley is damaged, the blade spindle is bent, contact an Authorized Service Dealer. 6. The belt may be damaged. Install new belt.
N
nicolefreemanSep 12, 2025
Why is the warning buzzer beeping continuously on my Exmark Lawn Mower?
- C
  clarksherylSep 12, 2025
  If the warning buzzer on your Exmark Lawn Mower emits a continuous beep, it could indicate: 1. Increasing temperature on the coolant temperature gauge. Turn the unit off and allow the engine and components to cool. 2. Low coolant level. Add coolant. 3. Debris on or around the radiator. Remove the debris. 4. If the water pump or alternator belt is worn, loose, or broken, contact Authorized Service Dealer.
R
rtranSep 12, 2025
What to do if the blades do not rotate on my Exmark Lawn Mower?
- A
  Amber JohnsonSep 12, 2025
  If the blades on your Exmark Lawn Mower do not rotate, check these items: 1. The drive belt may be worn, loose, or broken. Check the belt tension. 2. The drive belt may be off the pulley. Check the belt for damage and replace if necessary. Install the drive belt and check the belt guide for correct position. 3. The deck belt may be worn, loose, or broken. Install a new deck belt. 4. The deck belt may be off the pulley. Install the deck pulley and check the idler pulley, idler arm, and spring for correct position and function. 5. A broken or missing idler spring. Replace the spring.
G
Gina BlairSep 14, 2025
What does it mean if the warning buzzer emits intermittent beep on my Exmark Laser Z XS Lawn Mower?
- H
  hillarielSep 14, 2025
  If the warning buzzer on your Exmark Lawn Mower emits an intermittent beep, it could be due to: 1. Low oil level. Check the oil level. 2. Oil leaking from the engine. Contact Authorized Service Dealer.