Exmark Radius S Series User Manual

Maintenance
•CrankcaseCapacity:1.9L(2qt)whenthelter
ischanged.
•RecommendedOilType:Exmark4-Cycle
PremiumEngineOil
–APIserviceSJorhigher
g030595
Figure37
Viscositytable
Note:Topreventextensiveenginewearor
damage,alwaysmaintaintheproperoillevelin
thecrankcase.Neveroperatetheenginewiththe
oillevelbelowthe“L”(LOW)markoroverthe
“F”(FULL)markonthedipstick.
ChangingtheEngineOil
ServiceInterval:Aftertherst5hours
Every100hours(change
itmoreoftenundera
heavyloadorinhigh
temperatures)(Kohler
Engine).
1.Parkthemachinesothatthedrainsideisslightly
lowerthantheoppositesidetoensuretheoil
drainscompletely.
2.Starttheengineandletitrununtilwarm.This
warmstheoilsoitdrainsbetter.
3.Disengagethebladecontrolswitchandensure
theparkingbrakeisengaged.
4.Stoptheengine,removethekey,andwaitforall
movingpartstostopbeforeleavingtheoperating
position.
g027934
Figure38
Note:Torquetheplugto14N-m(125in-lb).
5.Changetheengineoillter.Applyathinlmof
cleanExmark4-CyclePremiumEngineOiltothe
rubbergasketonthenewlter.
46

Exmark Radius S Series Specifications

General

Engine Brand	Kawasaki
Cutting Width	52 inches
Transmission	Hydrostatic
Deck Construction	Fabricated
Deck Material	10-gauge steel
Engine Type	4-cycle
Drive Type	Rear-wheel drive
Speed	8 mph
Spindle Material	Aluminum
Deck Lift System	Foot-operated