Need help?Do you have a question about the Exmark VANTAGE S Series and is the answer not in the manual?
General| Brand | Exmark |
|---|---|
| Model | VANTAGE S Series |
| Category | Lawn Mower |
| Language | English |
Stresses the necessity of reading the entire manual for safe and proper operation.
Explains the safety alert symbol, warning levels, and important notes.
Covers training, preparation, and general safe operating procedures for users.
Details critical safety measures related to handling gasoline and its vapors to prevent fire and explosion.
Addresses hazards from hot engine parts, carbon monoxide, and safe operating conditions.
Outlines precautions for operating on slopes, including avoiding hazards and maintaining stability.
Covers safety precautions during maintenance, storage, and battery handling.
Details safety measures for hydraulic fluids, electrical systems, and preventing unauthorized modifications.
Explains the importance and interpretation of safety signs and symbols.
Illustrates fuse types and control panel safety indicators.
Provides torque requirements for wheel nuts and safety checks before maintenance.
Details various safety symbols and their meanings related to control panel indicators and operations.
Details specifications for engine, fuel system, electrical components, and transmission.
Covers specifications for tires, wheels, cutting deck, and torque requirements.
Introduces the machine's components and explains the motion control levers.
Details the operation of choke, throttle, park brake, and ignition switch.
Explains the function of hour meter, fuel gauge, PTO engagement, and deck lift handle.
Lists pre-start procedures and step-by-step instructions for starting the engine.
Details how to disengage PTO and properly stop the engine.
Covers procedures for driving forward, reverse, and adjusting the speed control bar.
Discusses when to use the operator platform in the up or down position.
Provides detailed instructions for adjusting the cutting height of the mower deck.
Covers safety precautions for transporting and loading the machine onto trailers or trucks.
Outlines a comprehensive schedule for routine maintenance tasks based on operating hours.
Details checks for engine oil level and battery charge status.
Details the correct and safe procedure for jump-starting a weak battery.
Explains cushion access for maintenance and procedures for checking mower blades.
Details checking safety interlocks and servicing the air cleaner.
Covers procedures for changing engine oil and checking hydraulic oil, tires, and belts.
Provides lubrication chart and instructions for caster wheel hubs.
Details procedures for changing hydraulic filter/fluid and fuel filter.
Provides steps to purge air from the hydraulic system.
Provides detailed instructions for leveling the mower deck.
Covers adjustments for overall height, deck lift force, and park brake.
Explains how to adjust the electric clutch by removing a shim.
Details the procedure for adjusting the forward speed control bar.
Explains how to adjust motion control levers to correct tracking issues.
Covers adjusting RH motion control handle position and caster pivot bearing pre-load.
Provides instructions for cleaning the engine, exhaust system, and cooling fins.
Covers cleaning under the deck and proper disposal of oil and batteries.
Lists causes and solutions for starter not cranking and engine starting problems.
Addresses engine overheating, mower pulling, and drive system problems.
Troubleshoots uneven cutting, vibration, and clutch engagement problems.
Presents a detailed electrical schematic showing component connections and wiring colors.
Provides a detailed electrical schematic illustrating system components and wiring pathways.
Shows a schematic diagram of the hydraulic system, including pumps, motors, and filter.
Outlines warranty terms, conditions, exceptions, and how to obtain service.
Illustrates how to use the slope indicator to determine safe operating angles and avoid exceeding 20 degrees.
To Next Page