Exmark Radius S Series User Manual

Maintenance
g027477
Figure53
Note:Ensuretheoilltergaskettouchesthe
engine,thenanextra3/4turniscompleted.
Note:Disposeoftheusedoilatarecycling
center.
6.Slowlypourapproximately80%ofthespecied
oilintothellertube—useoilrecommendedin
theCheckingtheEngineOilLevelsection.
g027484
Figure54
7.Checktheoillevel;refertoCheckingthe
EngineOilLevelsection.
8.Starttheengineandcheckforleaks.
ServicingtheSparkPlug
ServiceInterval:Every100hours/Yearly
(whichevercomes
rst)—Checkthespark
plug(Exmarkengine).
Every200hours/Every2
years(whichevercomes
rst)—Replacethespark
plug(Exmarkengine).
Ensurethattheairgapbetweenthecenterandside
electrodesiscorrectbeforeinstallingthesparkplug.
Useasparkplugwrenchforremovingandinstalling
thesparkplugandagappingtoolorfeelergaugeto
checkandadjusttheairgap.Installanewsparkplug
ifnecessary.
Type:ChampionRN9YCorequivalent
AirGap:0.030inch(.76mm)
53

Exmark Radius S Series Specifications

General

Engine Brand	Kawasaki
Cutting Width	52 inches
Transmission	Hydrostatic
Deck Construction	Fabricated
Deck Material	10-gauge steel
Engine Type	4-cycle
Drive Type	Rear-wheel drive
Speed	8 mph
Spindle Material	Aluminum
Deck Lift System	Foot-operated