Need help?Do you have a question about the Exmark Turf Tracer TT20KCC and is the answer not in the manual?
Explains the safety alert symbol and its meaning.
Emphasizes operator training and safe usage.
Covers terrain evaluation, PPE, and pre-operation checks.
Identifies specific model numbers based on serial range.
Details engine specifications and RPM.
Covers charging, battery, and interlock system details.
Details hydrostatic drive and hydraulic filter.
Safety warning and initial battery handling.
Steps for attaching the mower deck.
Procedures for checking and filling hydraulic oil.
Details the location and function of various controls.
Procedure for starting the engine.
How to engage and disengage drive levers.
Steps to check and add engine oil.
Steps for changing engine oil and filter.
Adjusting cutting height and anti-scalp rollers.
Lubrication points and schedule.
Troubleshooting for tracking issues.
Troubleshooting for uneven mowing.
Steps to diagnose engine start problems.
Explains the safety alert symbol and its meaning.
Emphasizes operator training and safe usage.
Covers terrain evaluation, PPE, and pre-operation checks.
Identifies specific model numbers based on serial range.
Details engine specifications and RPM.
Covers charging, battery, and interlock system details.
Details hydrostatic drive and hydraulic filter.
Safety warning and initial battery handling.
Steps for attaching the mower deck.
Procedures for checking and filling hydraulic oil.
Details the location and function of various controls.
Procedure for starting the engine.
How to engage and disengage drive levers.
Steps to check and add engine oil.
Steps for changing engine oil and filter.
Adjusting cutting height and anti-scalp rollers.
Lubrication points and schedule.
Troubleshooting for tracking issues.
Troubleshooting for uneven mowing.
Steps to diagnose engine start problems.
General| Category | Lawn Mower |
|---|---|
| Engine | Kawasaki FS600V |
| Fuel Type | Gasoline |
| Cutting Width | 48 inches |
| Transmission | Hydrostatic |
| Fuel Capacity | 5 gallons |
| Cutting Height | 1.5 - 4.5 inches |
| Deck Material | Steel |
| Warranty | 3 years |
To Next Page