Exmark VIKING HYDRO Parts Manual

20 pages

To Next Page

PARTS MANUAL

VIKING HYDRO

Date Purchased

Engine Model No. and Spec. No.

Engine Serial No. (E/No)

Model No.

Serial No.

The Serial No. plate is located on the top front engine frame on

the left hand side of the machine. For ease of ordering and

reference, we suggest that you record the information requested.

Place Model No. And Serial No.

Label Here (Included in Literature

Pack) or Fill in Below

™

For Serial Nos.

720,000 & Higher

Part No. 4500-207 Rev. A

Other manuals for Exmark VIKING HYDRO

J
Julie FranklinSep 12, 2025
What to do if Exmark Lawn Mower blades do not rotate?
- V
  Veronica BrownSep 12, 2025
  If the blades on your Exmark Lawn Mower do not rotate, check: * If the deck belt is worn, loose, or broken, install a new deck belt. * If the deck belt is off the pulley, install the deck pulley and check the idler pulley, idler arm, and spring for correct position and function.
A
Allison AshleySep 13, 2025
Why Exmark VIKING HYDRO blades do not stop when disengaged?
- K
  Kristi WintersSep 13, 2025
  If the blades on your Exmark Lawn Mower continue to rotate after being disengaged, consider these potential causes: * The blade brake may not be adjusted properly; adjust the blade brake. * The belt guide might not be properly set; adjust the belt guide to the proper position. * The PTO engagement might not be properly set; check the PTO engagement position.
S
schroedercindySep 15, 2025
Why do the blades not stop when disengaged on my Exmark VIKING HYDRO Lawn Mower?