Exor eX715 - Safety Instruction; Installation Procedure

16
MANUGENEX7xx - Version 2.09
© 2018-2020 EXOR International S.p.A. - Subject to change without notice
4 Technical Data
4.4 Installation Procedure
Place the xing brackets contained in the xing kit as shown in gure
4.3 Safety instruction
For all installation notes, please refer to the Installation Guide provided with the product.
!

CAUTION
Tightening torque: 130Ncm or screw each xing screw until the bezel corner gets in contact with the panel.