Exor eX715 User Manual

8
MANUGENEX7xx - Version 2.09
© 2018-2020 EXOR International S.p.A. - Subject to change without notice
Product Identication
The product may be identied through a plate attached to the rear cover. You will have to know the type of
unit you are using for correct usage of the information contained in the guide.
An example of this plate is shown in the gure below:
Note: the eX707 label is used as an example for eX700 Series
product model name eX707
product part number EX707U5P1
year/week of production 1816
serial number AA00011FT000000561AA
version id of the product 120408A04002000
manufacturer address Exor International S.p.A.
Via Monte Fiorino 9
IT-37057 San Giovanni Lupatoto (VR)
ATEX Marking DEMKO 17 ATEX 1871X
II 3G Ex nA IIC T5...T4 Gc 0°C≤Tamb≤+50°C or -20°C≤Tamb≤+60°C
II 3D Ex tc IIIC T95°C Dc
IECEx Marking IECEx: IECEx ULD 17.0019X
Ex nA IIC T5...T4 Gc 0°C≤Tamb≤+50°C or -20°C≤Tamb≤+60°C
Ex tc IIIC T95°C Dc
2 Standards and Approvals

Exor eX715 Specifications

General

Brand	Exor
Model	eX715
Category	Touch Panel
Language	English