EXPERT GRILL Commodore - Control Knob Operation; Setting Grill Temperature; Setting Meat Probe Temperature

- 17 -
Press and turn the control knob (When "SET" selected as shown ) to select
your desired temperatures, between 180
°
F~450
°
F.
This Bluetooth icon will flash after the grill is turn on. It will stop flashing
when the device is connected with your phone.
This icon will always light after the grill is turn on.
The Igniter icon displays ignition of your pellets. If this symbol is flashing
and the PID screen displays Err, then it means that your igniter is not
working.
The Fan icon displays the switching on of the fan. If this symbol is flashing
and the PID screen displays Err, then it means that your fan is not working.
The Auger icon displays the switching on of your auger motor. Sometimes
this symbol flashing and the PID screen displays Err showing that the auger
is not working.
Temperature indicator
Under 100°F, one grid on；
100°F~167°F, two grids on；
167°F~234°F, three grids on；
234°F~300°F, four grids on；
300°F~367°F, fire grids on；
367°F~434°F, six grids on；
Above 434°F, seven grids on；
The grids will be lighted one by one when the temperature is rising.
Control Knob
：
The control knob allows you to set your desired grill temperature. Once connected to a power
source and the power button is pressed. Then you can choose Smoke mode or Cooking mode.
When you turn on the grill, the default set is Smoke mode. PID screen displays actual temperature.
When you press the control knob, it will show in the middle of PID screen.
If you need Cooking mode, you can set your desired temperature through control knob.
The temperature will increase 5°F when you turn the control knob once in clockwise.
The temperature will decrease 5°F when you turn the control knob once in anticlockwise.
The setting range is 180°F~450°F.
If temperature is above 450°F, it will show "H" in the middle of PID screen.
If the temperature is bellow 180
°
F, it will show in the middle of the PID screen, and the grill
is under Smoke mode.
Press the control knob or wait for 5 seconds to lock your preset temperature, and get back to Actual
Grill Temperature.