EXPERT GRILL Commodore User Manual (English)

Questions and Answers:

B
Brandon HarrisAug 18, 2025
Why does my EXPERT GRILL Commodore Grill produce excess smoke?
- R
  ryanspenceAug 18, 2025
  If your EXPERT GRILL Grill is producing excess or discolored smoke, it could be due to excess grease build-up. Check and clean the interior grilling area, and consider doing a controlled burn off after cooking greasy foods. Also, check if the pellets are wet and replace them with fresh, dry pellets. Finally, make sure there aren't too many pellets in the hopper and remove any excess.
S
Stacey MannAug 20, 2025
Why is the igniter not working on my EXPERT GRILL Commodore?
- M
  matthew28Aug 20, 2025
  If the igniter on your EXPERT GRILL Grill isn't working, check for insufficient air flow by removing ash build-up and any obstructions in the fire pot, ensuring it's correctly seated in the firebox. Also, confirm that the igniter rod is heating up (without touching it to avoid burns) and check its placement relative to the fire pot. With the power off, inspect the wire connectors for tightness after removing the hopper's baseboard.
P
Paul SmithAug 23, 2025
How to fix EXPERT GRILL Grill PID screen that won't turn on?
- S
  Sarah CummingsAug 23, 2025
  If the PID screen on your EXPERT GRILL Grill isn't turning on, make sure the grill is properly plugged into a working GFCI outlet and all wire connections are firmly connected. Also, check if the circuit board fuse has been tripped, requiring a manual replacement. Additionally, ensure the GFCI is a minimum 10 Amp service and the connections are dry.
J
Julie MillerAug 26, 2025
What to do if my EXPERT GRILL Commodore shows “ErL” error?
- N
  Nancy HurstAug 26, 2025
  If your EXPERT GRILL Grill is showing an “ErL” error, it indicates insufficient or poor pellets. You should check and remove any ash build-up or obstructions in the fire pot, ensuring it's properly seated in the firebox. Make sure the igniter is heating up and correctly positioned. Check the fans to confirm they are working at the correct speed. Ensure the hopper has enough standard pellets. Try pressing the 'Prime' button or manually adding a small amount of pellets into the fire pot.
G
Glenn ReynoldsAug 28, 2025
How to stop frequent flare-ups on my EXPERT GRILL Commodore?
- K
  Kaitlyn SmithAug 28, 2025
  If your EXPERT GRILL Grill is experiencing frequent flare-ups, it could be due to a cooking temperature that is too high. Lower the temperature, especially when cooking greasy food, keeping it under 350°F. Another cause could be excess grease build-up, so check and clean the interior grilling area regularly, performing a controlled burn off after cooking greasy foods.
D
Danielle BrewerAug 30, 2025
Why is the temperature not stable on my EXPERT GRILL Commodore Grill?
- K
  Kimberly CastroAug 30, 2025
  If the temperature on your EXPERT GRILL Grill isn't stable, first ensure the control is set to Cooking mode. Insufficient airflow could be the cause, so check for ash build-up or obstructions in the fire pot, and ensure both the fire pot and firebox are seated properly to prevent air leakage. Also, make sure the fan is working correctly, the air intake isn't blocked, and there are no blockages in the hopper. Finally, check for sufficient standard wood pellets in the hopper, ensure the auger is working, and clean the meat probe.
R
Robert CollinsSep 2, 2025
What does “ErH” mean on my EXPERT GRILL Commodore Grill and how do I fix it?
- M
  Matthew DominguezSep 2, 2025
  If your EXPERT GRILL Grill displays “ErH”, it means the grill has overheated, possibly due to a grease fire or too many pellets. Turn the grill off and let it cool down. Then, clean the grill's interior and remove any excess pellets.
T
thomaskevinSep 4, 2025
What to do if my EXPERT GRILL Commodore P1 or P2 temperature shows 32°F?
- T
  Tommy JacobsonSep 4, 2025
  If your EXPERT GRILL Grill displays “P1 or P2 Temp shows 32°F” and it doesn't change after heating, the meat probe might be dirty. Clean it with a soft cloth or mild abrasive sponge, using hot water and soap. If the meat probe wire is wet, open the hopper cap, remove the probe, and dry the wires with a hair dryer.
J
Jonathan HopkinsSep 7, 2025
What does it mean when the “Err” and Auger icon is flashing on my EXPERT GRILL Commodore?
- E
  Erica GravesSep 7, 2025
  If your EXPERT GRILL Grill is showing an “Err” error and the Auger icon is flashing, make sure the Auger wire is correctly connected to the PID screen. Check the wire connections and replace the wire if it's damaged.
J
John PhillipsSep 9, 2025
What does “ErP” mean on my EXPERT GRILL Commodore and how can I resolve it?
- K
  Kevin GonzalesSep 10, 2025
  If your EXPERT GRILL Grill displays “ErP”, this indicates the thermal probe is either not plugged in or damaged. Ensure the thermal probe wire is correctly connected to the PID screen. Check the wire connections and replace the probe if damaged.