26
MAINTENANCE
BATTERY REPLACEMENT
When low battery indicator “ ” is displayed in CH section of the LCD display, it indicates that the current
channel sensor battery power give wireless sensor shown is low respectively. Please replace with new
batteries.
TROUBLESHOOT
Problems Solution
Indoor wireless
sensor is intermittent
or no connection
1. Make sure the sensor is within the transmission range
2. Make sure the channel displayed match to the channel selection
on sensor
3. If it still not work, reset the sensor and resynchronize with console.
No WI-FI connection 1. Check for WI-FI symbol on the display, it should be alway on.
2. Make sure you connect to 2.4G band but not 5G band of your WI-
FI router.
Temperature or
humidity not accurate
1. Do not place your console or sensor close to the heat source
2. If the sensor still not accurate adjust the value in calibration mode.
SPECIFICATIONS
CONSOLE
General Specication
Dimensions (W x H x D) 130 x 112 x 27.5mm (5.1 x 4.4 x 1.1 in)
To Next Page
Loading...
