9
TRANSPORT
Packaging
Delivery inspection
The machine is shipped in a custom-designed carton which utilizes model-specific polystyrene
cushions to protect it from damage.
The machine’s carton features standardized handling symbols to explain proper shipping and
storage methods.
The machine must remain in a horizontal position during the transport. Do not store or handle the
machine except on its feet.
During transport protect the carton and machine from impact drops, crushing, shocks, moisture
and exposure to extreme temperature.
Upon receipt and delivery ensure that the machine is in the exact condition described in the
enclosed documentation, and that all accessories are included. Missing items should be reported to
the manufacturer or dealer immediately.
Damage caused during transport should be reported to the shipping agent and the machine’s
distributor immediately.
Packaging materials are potentially dangerous and should be kept away from children.
The carton and all packing materials are recyclable and should be returned to a recycling center for
disposal.
Long-term storage requirements
Machine disposal requirements
MACHINE STORAGE AND DISPOSAL
Before storage or a month or more be sure to:
• Perform all weekly and periodic cleaning procedures described in this manual.
• Disconnect and roll up the power cord (this should be performed by a qualified person).
• Disconnect the machine’s water inlet hose from the domestic water supply and drain the boilers
(this should be performed by a qualified person).
• Clean the drip tray and exterior of the machine to remove any coffee or other residue.
• Cover / re-pack the machine in its original carton and store it in a dry place where it will not
be exposed to extreme temperatures or humidity.
• When returning the machine to service after long-term storage, perform all weekly and
periodic cleaning procedures and reconnect the water and power supplies (this should be
performed by a qualified person) before use.
If the machine ever needs to be scrapped and disposed of be sure to:
• Disconnect and roll up the power cord (this should be performed by a
qualified person).
• Disconnect the machine’s water inlet hose from the domestic water supply
and drain the boilers (this should be performed by a qualified person).
• Pack up and ship/deliver the machine to a certified recycling center.
To Next Page
Loading...
Need help?
General
