Need help?Do you have a question about the Extech Instruments 380193 and is the answer not in the manual?
General| Model | 380193 |
|---|---|
| Category | Measuring Instruments |
| Display | LCD |
| Battery | 9V battery |
| Type | Clamp Meter |
| Max Voltage | 600V |
| Max Current | 400A |
| AC Current Range | 400A |
| Weighting Networks | A-weighting |
| Time Weighting | Fast/Slow |
Explains international safety symbols used in the manual, such as caution and earth ground.
Lists essential safety measures and precautions for operating the LCR meter safely.
Defines the meaning of various symbols and annunciators displayed on the LCR meter's screen.
Instructions for turning the LCR meter on/off and managing the auto-power off feature.
Guide on selecting the test frequency between 120Hz and 1kHz for measurements.
How to choose between parallel (PAL) and series (SER) equivalent circuit modes.
Instructions for using autoranging or manually selecting measurement ranges.
How to use the L/C/R key to select the primary measurement parameter.
How to use the Q/D/R key to select secondary measurement functions.
Instructions for using the display hold feature and controlling the backlight.
How to activate and use the MIN/MAX/AVG recording function.
Guide on using the Relative mode to measure against a stored reference value.
How to set and use high/low limits for comparative measurements.
How to set and use percentage tolerance limits for measurements.
Overview of entering SET mode for limits and calibration procedures.
Procedure for performing open and short calibration to improve accuracy.
Detailed steps for entering upper and lower limit values into memory.
Detailed steps for entering upper and lower percentage limits.
Steps to store a reference value for use in the Relative mode.
Information on the environmentally sound disposal of batteries and the device.
Detailed accuracy specifications for capacitance measurements at 120Hz.
Detailed accuracy specifications for capacitance measurements at 1kHz.
Detailed accuracy specifications for inductance measurements at 120Hz.
Detailed accuracy specifications for inductance measurements at 1kHz.
Detailed accuracy specifications for resistance measurements.
Other key specifications including test frequency, display, power, and dimensions.
To Next Page