2 CO210-en-US v1.3 1/21
Introduction
Congratulations on your purchase of the Model CO210 Carbon Dioxide Monitor and Datalogger.
The CO210 measures, displays, and logs CO2 level, air temperature, relative humidity, date, and
time. The included Windows-based software and USB cable allow you to set up the datalogger
and transfer logged data to your PC. The CO210 is an ideal instrument for indoor air quality (IAQ)
monitoring. The CO210 is shipped fully tested and calibrated and, with proper use, will provide
years of reliable service.
Description
METER DESCRIPTION
1. LCD Multifunction display
2. Power LED indicator (blinks while datalogging)
3. Control buttons
Power adaptor jack, USB port, and sensors on back of meter
LCD DESCRIPTION
1. CO2 concentration in ppm
2. Date and Time
3. Air Temperature
4. % Relative Humidity
FUNCTION INDICATORS
ppm CO2 measurement units
GOOD/NORMAL/POOR CO2 air quality levels
Air Temp Air Temperature
Humidity % Relative Humidity
°C or °F Temperature units
MIN/MAX Minimum and Maximum readings
Fan icon flashes when the CO2 alarm triggers
CONTROL BUTTONS
SET Long press to enter setup mode. Saves settings.
ESC Exits setup page/mode. Stops the datalogger. Aborts calibration.
RESET Long press to clear the MIN/MAX memories.
LOG ▲ Start Datalogger. Select a mode or increase a value in the setup menu.
MIN/MAX ▼ Access MIN/MAX function. Use as down-arrow in setup mode.
Long press SET, ▼ and
▲
to enter the CO
2
calibration
.
To Next Page
Loading...
Need help?
General
