6 CO210-en-US v1.3 1/21
P3.0 Real-Time Calendar Clock
Press the ▲ button in P1.0 twice to access P3.0 for setting the real-time calendar clock. Press the
SET button and the meter will access P3.1, showing the blinking YEAR on the lower left. To
change the year, press the ▲ or ▼ button. Press the SET button to save the setting and move to
P3.2 (or press the ESC button to return to P3.0 without saving).
Press the ▲ button from P3.1 to access P3.2. The current MONTH setting will blink. To change
the month, press the ▲ or ▼ button. Press the SET button to save the setting and move to P3.3
(or press the ESC button to return to P3.0 without saving).
Press the ▲ button from P3.2 to access P3.3. The current DATE (day) setting will blink. To change
the day, press the ▲ or ▼ button. Press the SET button to save the setting and move to P3.4 (or
press the ESC button to return to P3.0 without saving).
Press the ▲ button from P3.3 to access P3.4. The current 12/24-hour clock setting will blink. To
change it, press the ▲ or ▼ button. Press the SET button to save the setting and move to P3.5
(or press the ESC button to return to P3.0 without saving).
Repeat as above to finish setting P3.5 (HOURS) and P3.6 (MINUTES)
P4.0: Factory Default Reset
Press the ▲ button in P1.0 three times to access P4.0 where you can reset the meter to its
default settings. Press SET and the meter will access P4.1 with a blinking “No”. Press the ▲ to
switch the status to ‘Yes’ and then press either the SET button to confirm and continue or the
ESC button to abort the process.
To Next Page
Loading...
Need help?
General
