EasyManuals Logo

Extech Instruments EMF450 User Manual

Extech Instruments EMF450
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
EMF450-en-GB_V1.4 7/17
3
Introduction
This meter simultaneously measures and displays Magnetic Field, Electric Field, and RF Strength.
The unit of measurement and the measurement types are expressed in units of electrical and
magnetic field strength and power density. This meter is ideal for EMF measurements of power
lines, electrical appliances, industrial devices, cell phones, base stations, and microwave leakage.
This device is shipped fully tested and calibrated and, with proper use, will provide years of
reliable service. Please visit our website (www.extech.com) to check for the latest version of this
User Guide, Product Updates, Product Registration, and Customer Support.
Features
Data hold (HOLD)
Overload display “OL”.
Brightness options: low-medium-high
Selectable Auto Power off (APO) Time: 1; 3; 5; 10; 15; 30 minutes
Key press Sounds / Alarm Sounds: On
; Off with programmable tone selections
Information screen shows software version
Languages: English, Traditional Chinese, Simplified Chinese, Japanese, Spanish
Magnetic units selectionGauss (mG) or Tesla (μT)
Electric field strength: V/m
RF Strength Units selection: (μW/m² ~mW/m²) (μW/cm²) (m V/m ~V/m) (mA/m) (dBm).
Low-Frequency EMF Readings: Individual and aggregated XYZ axial readings:
High-frequency EMF Readings
RF Historical Records; up to 20 groups.
Low battery indication HIGH LOW

Other manuals for Extech Instruments EMF450

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Extech Instruments EMF450 and is the answer not in the manual?

Extech Instruments EMF450 Specifications

General IconGeneral
Sensor TypeLF - Magnetic Fields, LF- Electric Field Sensor, RF Strength
Range20mG /200mG /2000mG, 2µT /20µT /200µT, 50V/m to 2000V/m, 0.02µW/m² to 554.6mW/m²
Display resolution0.02/0.1/1, 1V/m, 0.02µW/m², 0.2µA/m, 0.2mV/m, 0.002µW/cm², 2dB
Frequency range50/60Hz, 50/60Hz, 50MHz to 3.5GHz
Accuracy± (15% + 100 digits), ± (7% + 50 digits), ± 2dB at 2.45GHz
Display4 digits Triple color TFT display
Sample rate6 seconds
SensorsTriple axes (XYZ) ELF and RF and Electric field sensor
BatteryThree (3) 1.5V alkaline batteries
Battery LifeApprox. 8 hours
Operating temperature and RH%5°C~40°C (41°F ~104°F); < 80%RH
Storage temperature and RH%-10°C to 60°C (14°F ~140°F); < 70%RH
Weight and Dimensions IconWeight and Dimensions
WeightApprox. 120g (4.2 oz.)
Dimensions115 x 60 x 21mm (4.5 x 2.4 x 0.08”)

Related product manuals