Specifications
Sensor Type: LF - Magnetic Fields
Range: 20mG /200mG /2000mG, 2µT /20µT /200µT
Display resolution: 0.02/0.1/1
Frequency range: 50/60Hz
Accuracy: ± (15% + 100 digits)
Sensor Type: LF- Electric Field Sensor
Range: 50V/m to 2000V/m
Display resolution: 1V/m
Frequency range: 50/60Hz
Accuracy: ± (7% + 50 digits)
Sensor Type: RF Strength
Range: 0.02µW/m² to 554.6mW/m²
0.02µW/cm² to 55.4µW/cm²
36.1mV/m to 14.46V/m
0.02mA/m to 38.35mA/m
-51dB to 16dBm
Display resolution: 0.02µW/m², 0.2µA/m, 0.2mV/m, 0.002µW/cm², 2dB
Frequency range: 50MHz to 3.5GHz
Accuracy: ± 2dB at 2.45GHz
Display: 4 digits Triple color TFT display
Sample rate: 6 seconds
Sensors: Triple axes (XYZ) ELF and RF and Electric field sensor
Over range condition: The EM450 is equipped with three individual aerial
sensors to measure EMF. Overload indication (OL)
applies to all three axes (X, Y, and Z)
Battery: Three (3) 1.5V alkaline batteries
Battery Life: Approx. 8 hours
Alarm: Beeps when readings are in the red display region
Operating temperature and RH%: 5°C~40°C (41°F ~104°F); < 80%RH
Storage temperature and RH%: -10°C to 60°C (14°F ~140°F); < 70%RH
Weight: Approx. 120g (4.2 oz.)
Dimensions: 115 x 60 x 21mm (4.5 x 2.4 x 0.08”)
Copyright © 2015-2017 FLIR Systems, Inc.
All rights reserved including the right of reproduction in whole or in part in any form
www.extech.com
To Previous Page
Loading...
Need help?
General
Weight and Dimensions
