4 TM500-EU-EN v1.1 12/13
SetupMode
Basicsettingsataglance
Toviewthecurrentconfigurationofthemeterwithregardtotime,date,anddatalogging
samplingratepresstheSETbuttonfor>4seconds.Themeterwillnowdisplaytheconfiguration
menu.TheSetuppagerevertstothetemperaturewindowinapproximately8secondsifthere
arenobuttonpresses.
AccessingtheSetupmode
1. PressandholdtheSETbuttonforatleast4secondstoaccesstheSetupmenu.
2. PresstheNEXTbuttonmomentarilytostepthroughtheavailableparameters.
3. WhenaparameterthatistobechangedisflashingclickENTERtoenterthechangemode.
UsethearrowkeystochoosethesettingandpresstheENTERbuttontomakethechange.
4. Notethatthemeter
automaticallyswitchesoutoftheSetupmodeifnokeyispressed
within8seconds.
5.
TheavailableSetupparametersarelistedbelow.Additionaldetailedinformationis
providedbelowthislist:
dAtE
Settheclock(Year/Month/Date; Hours/Min utes/Seconds)
LooP
StartandEndaloopmeasurementcycle
dEC
Setthenumericalformat;USA(decimal:20.0 0)orEuropean(comma:20,00)
PoFF
Automaticpower‐off(Enableordisabletheauto‐power offfunction)
bEEP
Setthebeeper soundON/OFF
t‐CF
Select thetempera ture unitof measure(CorF)
SP‐t
Setthedatalog gersamplingra te(1to3600second s)
SdF
FormattheSDmemorycard
SettingtheClockTime
1. AccessthedAtEparameter.
2. PresstheENTERbutton.
3. UsethearrowbuttonstochangetheYEARvalue.PressENTERtoconfirmsetting.
4. RepeatforMONTH,DAY,HOUR,MINUTEandSECONDS.
5. PresstheENTERbutton toexittotheSetupmode.PressESCtoexitsetupmode.
Note:Theclockwillkeepaccuratetimeevenwhentheme
terisswitche
doff.However,ifthe
batteriesexpiretheclockwillhavetoberesetafterfreshbatteriesareinstalled.