Extend EXS-303 - MACHINE INFORMATION; Areas of Application; Environmental Information

11
2. MACHINE INFORMATION
2.1 Areas of Application
This plastic strapping machine can be used for a wide range of applications where the
minimum package width is at least 60mm, and the minimum height is 20mm.
This machine is particularly suitable for heavy packaged goods as well as printed products,
boxes, etc.
Packaging Limitation
It’s not possible to pack:
 Products larger or heavier than that allowed.
 Wet Products
 Flammable products
 Explosive products
 Agri-foodstuffs
 Pharmaceuticals
 Hazardous products
2.2 Environmental Information
The strapping machine shall be installed in the following conditions:
 Supply voltage: +-10% nominal supply voltage
 Source frequency: +-10% nominal frequency
 Ambient temperature: 5°C - 40°C (41℉-104℉).
 Relative humidity: not exceed 35~85%RH
 Please provide a suitable illumination around the machine for safety operation.
Conditions For Use
Make sure there is room for easy application and maintenance
The machine must be installed in a closed, well-ventilated area where there are no