12
explosions or fire hazards Position the machine in a place free of humidity, flammable
materials, gas or explosives. Make sure that it is level.
Please do not spray water or wet wipe machine body.
Noise - characteristic values
The noise emission values determined according to EN ISO 3746 for the sound power level
or EN ISO 11202 for the sound pressure level at the workplace on the basis of the working
conditions are as below:
A measurement uncertainty allowance of K = 4 dB(A) applies to the stated emission values.
Sound power level L
WA
= 88.7 dB(A)
Emission sound pressure level at the workplace L
PA
= 75.3 dB(A)
To minimize the emission sound pressure level, machine is equipped with a timer standby
mode that can be adjusted by technician.
Demolition and Waste Disposal
The machine does not contain dangerous components or substances which require special
disposal procedure. For that which concerns material elimination, comply with the
Standards in the country where the machine has been disassembled.
Caution: do not leave waste polypropylene strap on the floor to minimize slip hazards.
2.3 Machine Description
Semi-Automatic strapping machine for polypropylene (PP) strapping material.
Strap width 5-15.5mm adjustable.
High efficiency of heater plate.
Extra strong construction.
Simple and user-friendly operation.
Electronic outside tension control.
Strap tension adjustable from soft to very high.
Simple and easy maintenance
To Next Page
Loading...
