Need help?Do you have a question about the Extend EXS-303 and is the answer not in the manual?
General| Brand | Extend |
|---|---|
| Model | EXS-303 |
| Category | Packaging equipment |
| Language | English |
Manual and safety remarks must be read and followed before use. Keep manual with machine.
Users must be instructed in legal regulations for accident prevention and environmental protection.
Ensure machine is safe, check for damage, report defects, and stop if malfunction occurs.
Handle electrical issues carefully, use qualified electricians, inspect wiring, and disconnect power before work.
Product must be grounded to reduce electric shock risk. Use proper grounding plug and outlet.
Verify power line voltage and grounding. Ensure only PP strapping is used.
Monitor package limits, listen for unusual sounds, and stay clear of the machine's arch.
Clean dust and dirt from the unit. Turn off power when the machine is not in use.
Explains various safety symbols indicating hazards like electric shock, hot surface, and pinch points.
Machine is suitable for applications with minimum package width 60mm and height 20mm.
Specifies supply voltage, frequency, ambient temperature (5-40°C), and humidity (35-85% RH) for installation.
Details features like semi-automatic operation, strap width adjustment, heater plate, strong construction, and easy maintenance.
Lists safety features including warning labels, covered live parts, table cover, and precautions for the hot heating unit.
Provides electrical specifications (power, voltage, current) and technical data (strap width, machine size, weight, speed, noise).
Explains the machine's data plate for model, serial number, year, and electrical technical information.
The machine is delivered as a transport unit on a wooden pallet secured with polyester strap.
Instructions for securing the machine on the pallet and removing all protection materials.
Defines the required clear space around the machine for safe operation and maintenance activities.
Identifies and explains the function of controls: power switch, tension VR, feed length VR, and manual feed/reset buttons.
Details strap specifications and the step-by-step procedure for loading and threading the polypropylene strap.
Details for JOG function, Cooling Time adjustment, and Heater Plate Temperature settings during operation.
Instructions on how to adjust the machine for different strap widths, from 5mm to 15.5mm.
Check strap width adjustment and consult operation manual section 5 for guidance.
Adjust Temperature VR, Cooling Time VR, or use JOG to check heater plate movement.
Press the RESET button to ensure the machine is in the ready position.
Check actuator function and position, or consider replacing the actuator.
Instructions for cleaning dust from strap guiding and clamps using an air gun.
Lubricate moving mechanisms, especially the clamps unit, avoiding specific bandways or guides.
Procedures for cleaning and lubricating gripper/welding units, heater plate, springs, and rollers.
A detailed list of components including part numbers, descriptions, and quantities for the machine.
To Next Page
