27
Lubrication on moving mechanism , especially lubricate on following structures:
Clamps Unit (Between clamp seat and clamps)
Noted: Do not lubricate on any bandway or guide where transport strap.
Noted: After cleaning and lubrication, please do several bundles to check.
Monthly Maintenance:
Please take out END GRIPPER UNIT and WELDING CLAMP UNIT to do complete
cleaning and lubrication
Please clean both sides (upper/lower) of Heater Plate
Please check all structure with spring if working smoothly
Please clean dust around limit switch
Please clean dust accumulated on rollers (Pool Feed Roller, Tension Roller, Feed Roller)
To Next Page
Loading...
