Extend EXS-303 - TROUBLE SHOOTING; Feeding or Reversing is not smooth; Sealing is not good; Machine cannot feed

25
6. TROUBLE SHOOTING
 Feeding or Reversing is not smooth
Please check strap width adjustment is correct, please check operation manual 5.
ADJUSTMENT.
 Sealing is not good
 Please adjust Temperature VR for higher temperature setting.
 Please adjust Cooling Time VR for longer cooling time setting
 Please use JOG to check if heater plate’s movement is smooth
 Machine cannot feed
Please press RESET button to make sure this machine is in ready position.
 Machine does not function when strap insert to the chute
Please check the actuator if working correctly, to adjust the actuator position or to
replace.