5
1. GENERAL SAFETY INSTRUCTIONS
1.1 Basic Operation
The manual and the safety remarks are to be read before use. The operator manual
should be kept with the machine at all times. Intervals for maintenance and
inspections are to be adhered to.
This machine was built with state of the art technology and rigid adherence to safety
standards.
Unless used properly, it can cause injury to operators or persons in close proximity to
the machine. In addition, improper use can cause damage to the machine or property
around the machine.
1.2 Basic Safety Precautions
The user is to be instructed in all other generally applicable legal and other mandatory
regulations relevant to accident prevention and environmental protection in addition
to the operating instructions.
For safety reasons, long hair must be tied back or otherwise secured, garments must
be close fitting and no jewelry may be worn.
Use protective equipment whenever required by circumstances or by law.
Carefully observe all safety instructions and warnings attached to the machine and
make sure that they are always complete and perfectly legible.
Always make certain that persons being trained and instructed in working on or with
the machine are permanently supervised by an experienced person.
Work on the electrical system and equipment of the machine is only to be carried out
by a skilled electrician or by persons under the supervision and guidance of a skilled
electrician and in accordance with the rules and regulations of electrical engineering.
To Next Page
Loading...