Extollo LANSocket 1500 - Determining the IP Address

29
The information contained within this document is confidential and cannot be reproduced
without the approval of Extollo Communications.
Logging into the LANSocket 1500
Determining the IP Address
Step 1
The LANSocket 1500 has an integrated web Graphical User Interface (GUI) for management
purposes. It also has Dynamic Host Configuration Protocol (DHCP) enabled, which means that
the LANSocket 1500 will automatically
obtain an IP address from the Internet router.
To access the web GUI on the LANSocket 1500, the IP address that was assigned to the
LANSocket 1500 is required. To determined what IP address was assigned to a LANSocket 1500,
log into the Internet router and see what devices are connected and their associated IP address.
For example: Below is a captured window from an Internet router that shows the connected
devices and their assigned IP addresses. The “unknown” devices are the LANSocket 1500’s
which were assigned the IP addresses of 192.168.1.65 and 192.168.1.67.
NOTE: The IP addresses assigned to your Una may differ from this example.