Extor 4100R5 - Starting and Stopping the Equipment

Page 19 / 37
STARTING AND STOPPING THE EQUIPMENT
1. Turn the main switch to 0 position.
2. Pressurise the compressed air system of
the vacuum equipment.
3. Connect the electrical plug.
4. Turn the main switch to position 1.
5. The display panel will now display the
main menu.
6.
F1=START
F2=STOP
F3=REMOTE
F4=SETTINGS
If you want to bypass cleaning after
use, press 'F4' after you have
stopped the suction machine.
Press "F2", which
shuts off the suction,
and cleaning begins
after operation.
Press 'F1', and the
suction machine will
start.