Page 6 / 37
SAFETY INSTRUCTIONS
Use only original spare parts.
Do not wash the equipment with water.
Do not operate the device without filters.
Do not use the device for the removal of fumes.
Disconnect the device from the mains before starting with maintenance works.
Discharge pressure from the compressed air lines of the equipment before starting with
maintenance works.
Engage the safety lock before starting with maintenance and repair works. The person
conducting the maintenance work should hold the key of the safety lock.
Use safety goggles, a respirator and safety gloves when servicing, operating or repairing
the equipment.
Do not vacuum water or any other liquid.
Do not vacuum sharp materials such as metal or glass, which could damage the filters.
Do not vacuum smoldering or burning materials.
Use the fire extinguishing equipment intended for electrical devices in case of fire.
IMPORTANT!
This device is designed for the removal and filtration of NON-EXPLOSIVE dry dust.
Use the device only for the applications described in this manual.
Follow the maintenance and safety instructions of this manual to ensure efficient and safe
operation of the device.
To Next Page
Loading...