Extreme Networks AP-8533 User Manual

Hardware Installation
AP-8533 Access Point Installation Guide 20
The LEDs display error conditions, and transmission, and network activity for the 5 GHz
802.11ac (amber) radio and the 2.4 GHz 802.11n (green) radio, sensor radio (white) and the
BLE radio (blue).
State
5 GHz Activity
LED (Amber)
2.4 GHz
Activity LED
(Green) LED (Blue) LED (White)
Firmware
Update
On Off Off Off
Normal
Operation
If the radio for
this is disabled:
turned off.
If there is
activity on this
band:
Blink interval at
2 times per
second
If the radio for
this is disabled:
turned off.
If there is
activity on this
band:
Blink interval at
2 times per
second
N/A N/A
Not
configured
On On N/A N/A
Locate AP
Mode
LEDs blink in an
alternating
green, amber,
blue and white
pattern using an
irregular blink
rate. This LED
state in no way
resembles
normal
operating
conditions
LEDs blink in an
alternating
green, amber,
blue and white
pattern using an
irregular blink
rate. This LED
state in no way
resembles
normal
operating
conditions.
LEDs blink in an
alternating
green, amber,
blue and white
pattern using an
irregular blink
rate. This LED
state in no way
resembles
normal
operating
conditions.
LEDs blink in an
alternating
green, amber,
blue and white
pattern using an
irregular blink
rate. This LED
state in no way
resembles
normal
operating
conditions
Sensor
without
SS
connected
N/A N/A N/A Off
Sensor with
SS
connected
N/A N/A N/A On
Air
Termination
state
N/A N/A N/A Blinking 0.5
second in 1
second duty
cycle
BT radio
disabled
N/A N/A Off N/A
BT radio
enabled
(operational)
N/A N/A On N/A

Extreme Networks AP-8533 Specifications

General

Brand	Extreme Networks
Model	AP-8533
Category	Access point
Language	English