Related Links
Working with SNMPv2 Communities on page 201
Working with SNMPv3 Users on page 201
Working with SNMP Notifications on page 202
Working with SNMPv2 Communities
1 To access SNMPv2 Communities:
•
Go to Administration > System > Settings > SNMP
•
Go to Sites and select a site. Then, click SNMP.
2 From the SNMP field, select SNMPv2.
3 To add an SNMPv2 Community:
1 From the SNMPv2 field, click Add.
2 Type a name and access level.
•
Read. Private Community. Default community for read-only SNMP communication.
•
Write. Public Community. Default community for write SNMP communication. Available for
full ExtremeCloud Appliance environment support only.
4 To delete a community, select a community from the list and click Delete.
Related Links
SNMP Configuration on page 199
Working with SNMP Notifications on page 202
Working with SNMPv3 Users on page 201
Working with SNMPv3 Users
1 To work with SNMPv3 users:
•
Go to Administration > System > Settings > SNMP
•
Go to Sites and select a site. Then, click SNMP.
2 From the SNMP field, select SNMPv3.
The following parameters display for SNMPv3:
•
Context String
•
Engine ID
•
SNMPv3 Users
3 To add an SNMPv3 user:
1 From the SNMPv3 field, click Add.
2 Type a user name and security level. Valid security level values are:
•
No Authentication/ No Privacy
•
Authentication/ No Privacy
•
Authentication/Privacy
4 To modify a user, select a user from the list and click Edit.
5 To delete a user, select a user from the list and click Delete.
Related Links
SNMP Configuration on page 199
Administration
ExtremeCloud Appliance User Guide for version 4.36.03 201
To Next Page
Loading...
