Extreme Networks ExtremeCloud Appliance Series - Page 202

Working with SNMP Notifications on page 202
Working with SNMPv2 Communities on page 201
Working with SNMP Notifications
To work with SNMP notifications:
1 Go to Administration > System > Settings > SNMP.
2 Find the SNMP Notifications field.
3 To add a notification:
1 Click Add.
2 Enter the following:
•
Notification name
•
SNMP version
•
IP address and UDP Port of the server that will receive SNMP messages.
3 Click Add.
Note
You can create two trap destinations for SNMP Notification. Set the type of message that
you will trap from the Forward Trap field on the SNMP configuration page.
4 To modify notification settings, select a notification from the list and click Edit.
5 To delete a notification, select a notification from the list and click Delete.
Related Links
SNMP Configuration on page 199
Working with SNMPv3 Users on page 201
NEW!
MAC Format
ExtremeCloud Appliance provides the ability to define the user MAC address format for MAC-based
authentication. Select from a set of MAC encoding formats, to match the format that you are using in
your existing authentication infrastructure.
Select the MAC address format and click Save.
NEW!
NSight Configuration
ExtremeCloud Appliance can function as a proxy server for NSight. Configure the NSight server here:
1 Go to Administration > System > Setting.
2 Under NSight Configure, provide the following:
Connection
HTTPS
IP Address IP address of NSight server
Administration
ExtremeCloud Appliance User Guide for version 4.36.03 202