Extreme Networks ExtremeSwitching X695 Series User Manual

Table 61: Maximum Number of LRM/MACsec Adapters, by Switch Model and
Connection Type (continued)
Switch Model Mode: LRM Only Mode: LRM and MACsec
Two ports
no aux. power
Two ports
0.5A aux. power
Two ports
aux. power
(see note 1)
One port
One bypass
aux. power
(see note 1)
X460-G2-24p
Eight1Gb SFP ports
Four10Gb SFP+ ports
2 2 6 6
X460-G2-24x
24 1Gb SFP ports
Four10Gb SFP+ ports
2 2 10 12
X460-G2-48t
Four10Gb SFP+ ports
2 2 2 2
X460-G2-48p
Four10Gb SFP+ ports
2 2 2 2
X460-G2-48x
48 1Gb SFP ports
Four10Gb SFP+ ports
2 2 17 20
X590-24x
24 10Gb SFP+ ports
9 12 11 12
X620-8t-2x
Two 10Gb SFP+ ports
1 1 1 1
X620-10x
10 10Gb SFP+ ports
2 4 3 4
X620-16t
X620-16p
Four10Gb SFP+ ports
Already LRM 2 2
X620-16x
16 10Gb SFP+ ports
4 7 5 6
X670-G2-48x
48 10Gb SFP+ ports
14 24 18 20
X670-G2-72x
72 10Gb SFP+ ports
21 34 26 29
X690-48x
48 10Gb SFP+ ports
16 24 20 23
Notes:
1. With 1W optics modules (SR, LR, LRM, 10 km bidirectional, AOC, DAC, and most 1 Gb optics), use
0.5A auxiliary power sources.
With 1.5W optics modules (ZR, ER, 40 km bidirectional, DWDM ZR, 1 Gb - 120km bidirectional), use
1.0A auxiliary power sources. Refer also to temperature limitations in Limitations for Some Optical
Devices on page 151.
2. This model requires a license upgrade for 10 Gb functionality on the SFP+ ports.
Maximum Capacity for Using the LRM/MACsec Adapter
with Supported Switch Models Expansion Modules
150 ExtremeSwitching Hardware Installation Guide

Extreme Networks ExtremeSwitching X695 Series Specifications

General

Brand	Extreme Networks
Model	ExtremeSwitching X695 Series
Category	Switch
Language	English