Extreme Networks Px Series - Page 115

Px Series Application Switch Installation and Configuration Guide Index - iii
AUX 2-2
console 2-2
Gigabit Ethernet 2-2
management port 2-2
positioning 2-4
power socket 2-3
power supply 2-3
powering on 2-5
PxM
configuring redundancy with ESRP 8-6
multiple VLANs and redundancy 8-7
R
rack mounting 2-4
real servers
creating 5-1
description of 5-1
maximum connections 5-2
weight 5-2
rear view 2-3
redundancy 8-1
automatic synchronization 8-4
for PxM 8-6
remote logging 4-16
response times, improving 1-1
round robin policy 6-2
S
self-identifying cookie persistence mode 6-5
serial number 2-3
serial port. See console port
server groups
creating 5-2
description of 5-2
health checks 9-4
load balancing policy 5-2
naming 5-2
port number 5-1
scheduling policies 6-1
server load balancing, purpose 1-1
server selection policies 1-3
server-only NAT 6-15
show commands 10-1
SNMP
community strings 4-10
configuring 4-9
settings 4-9
system contact 4-9
system location 4-9
system name 4-9
traps 4-10
socket, power 2-3
SSL session identifier persistence 5-4, 6-13
statistics commands 10-1
stickiness
configuring 6-5
description of 6-2
switching
configuring domain name switching 7-3
description of 7-1
domain 7-2
URL 7-4
URL examples 7-4
symbols, command-line interface 4-2
syntax helper 4-2
syntax, understanding 4-2
syslog 4-16
system contact 4-9
system location 4-9
system name 4-9
T
TCP Open health checks 9-1
TCP sequence 1-5
traps 4-10
U
URL switching 5-5, 7-4
user accounts 4-4
V
verifying the installation 2-5
viewing accounts 4-6
virtual IP (VIP) 1-2, 5-4, 7-3
virtual service
creating 1-7, 5-1
definition of 1-3
VLANs
multiple with ESRP 8-7
working with 4-8
VRRP
and ESRP 8-3
automatic synchronization 8-4
configuring 8-2
description of 8-1
preempt 8-2
priority 8-2
timers 8-2
virtual router ID (VRID) 8-2
W
website availability, increasing 1-1
weighted least connections policy 6-2
weighted round robin policy 6-2