Extreme Networks Px Series - Configuration Example

5-6 Px Series Application Switch Installation and Configuration Guide
.
Configuration Example
The example builds upon the example from Chapter 4 and includes configurations for
the simple layer 4 web server infrastructure for
yourdomain.com. Notice that VLANs
and the system-ip address definition have been added to the configuration.
For layer 7 examples, consult later chapters in this book.
Table 5-1: Tag Specifications
Tag Specification Description Tag Range
dot1p-to-svr <tag> Applies the specified tag to the 802.1p header for
packets directed to the server.
0 - 7
dot1p-to-net <tag> Applies the specified tag to the 802.1p header for
packets directed to the network.
0 - 7
diffserv-to-svr <tag> Applies the specified tag to the DiffServ code point
for packets directed to the server.
0 - 0x3F
diffserv-to-net <tag> Applies the specified tag to the DiffServ code point
for packets directed to the network.
0 - 0x3F
WS_016
DNS server
64.1.1.9
Real
servers
Internet
Syslog server
10.10.10.20
SummitPx1
system IP 64.1.1.10
proxy IP 64.1.1.11-24
Layer 3 switch
64.1.1.1
Net manager
10.10.10.21
Management IP
64.1.1.10
VIP
64.1.2.10
64.1.1.50 64.1.1.51 64.1.1.52
Management net
10.10.10.1