Extreme Networks Px Series - Page 88

7-10 Px Series Application Switch Installation and Configuration Guide
The commands to configure this example are as follows:
#----------------------------------------------------------------
# servers
#----------------------------------------------------------------
config server index 1 ip 64.1.1.50 port 80 max-con 5000 weight 1
config server index 2 ip 64.1.1.51 port 80 max-con 5000 weight 1
config server index 5 ip 64.1.1.60 port 443 max-con 500 weight 1
config server index 6 ip 64.1.1.61 port 443 max-con 500 weight 1
config server index 10 ip 64.1.1.70 port 80 max-con 5000 weight 1
config server index 11 ip 64.1.1.71 port 80 max-con 5000 weight 1
config server index 20 ip 64.1.1.80 port 80 max-con 5000 weight 1
#
#
#----------------------------------------------------------------
# server-groups
#----------------------------------------------------------------
config server-group name appserv policy rr
config server-group name appserv add-server index 1 - 2
config server-group name ecom policy lc
config server-group name ecom add-server index 5 - 6
WS_018
Streaming media
64.1.1.80
Application
servers
Internet
SummitPx1
system IP 64.1.1.10
proxy IP 64.1.1.11-24
Layer 3 switch
64.1.1.1
VIP
64.1.2.10
64.1.1.60
SSL servers
64.1.1.51
64.1.1.50
64.1.1.61
64.1.1.70
Images
64.1.1.71
Syslog server
10.10.10.20
Net manager
10.10.10.21
Management IP
64.1.1.10
Management net
10.10.10.1