Extreme Networks Summit X460-24t User Manual

Confidential and proprietary information of Extreme Networks. © 2011 Extreme Networks, Inc.
All rights reserved. DRAFT. October 20, 2011
Summit Family Switches Hardware Installation Guide
105
C H A P T E R
2
Summit Power Supplies
This chapter describes Extreme Networks power supplies available for use with the Summit family
switches.
This chapter includes the following sections:
● Overview on page 105
● External Power Supplies on page 106
● Summit Replaceable Internal Power Supplies on page 115
Overview
Summit family switches are shipped with an internal power supply (replaceable on the Summit X460,
X480, X650, and X670 series switches) that supplies all of the power needed for most switch operation.
An optional redundant power supply can be added to most Summit models to protect against a power
supply failure and to provide increased support for PoE operation on applicable switches.
The following Summit switch series use external power supplies for redundancy:
● Summit X150 series
● Summit X250e series
● Summit X350 series
● Summit X450 series
● Summit X450a series
● Summit X450e series
The following Summit switch series provide power redundancy by installing a second replaceable
power supply:
● Summit X460 series
● Summit X480 series
● Summit X650 series
● Summit X670 series

Extreme Networks Summit X460-24t Specifications

General

Model	Summit X460-24t
Ports	24 x 10/100/1000BASE-T
Switching Capacity	128 Gbps
VLANs Supported	4, 094
PoE Support	No
AC Input Voltage	100-240 VAC
AC Input Frequency	50/60 Hz
Type	Switch
Uplink Ports	4 x 10G SFP+
Power Supply	Internal
Redundant Power Supply	Optional
Operating Temperature	32°F to 113°F
MAC Address Table Size	32, 000
Jumbo Frame Support	9, 216 Bytes
Management	CLI, Web, SNMP
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Humidity	5% to 95% non-condensing