Syntax
show mac address-table [conf | static | aging-time | {{learning | count}
[interface port_type [port_type_list]]} | {address mac_addr [vlan
vlan_id ]} | vlan vlan_id | interface port_type [port_type_list]]
Parameters
None.
show mac address table learning
Description
Learn/disable/secure stat.
Syntax
show mac address-table [conf | static | aging-time | {{learning | count}
[interface (port_type [v_port_type_list])]} | {address v_mac_addr [vlan
v_vlan_id]} | vlan v_vlan_id_1 | interface (port_type
[v_port_type_list_1])]
Parameters
None.
show mac-address-table (per gigabit port)
Description
Show static MAC forwarding table per gigabit port.
Syntax
show mac address-table {learning | count} [interface port_type
[port_type_list]]
Parameters
Name
Description
port_type
Port type in Fast, Giga or Tengiga Ethernet
portNo
Valid values: 1 – 10
Type: Mandatory
show mac address-table (per VLAN index)
Description
Show static MAC forwarding table per VLAN
index.
ISW Commands
ISW Series Managed Industrial Ethernet Switch Command Reference Guide 26
To Next Page
Loading...
Need help?
General