sflow timeout
Description
Receiver timeout measured in seconds. The switch decrements the timeout once per second, and as
long as it is non-zero, the receiver receives samples. Once the timeout reaches 0, the receiver and all its
configuration is reset to defaults.
Syntax
sflow timeout [receiver range_list] 0-2147483647
Parameters
Name Description
range_list
Sampler instance
0-2147483647
Number of seconds.
SNMP Configure Command
snmp-server
Description
Enable SNMP
server
Syntax
snmp-server
Parameters
None.
snmp-server access
Description
snmp-server access configuration
Syntax
snmp-server access group name model {v1 | v2c | v3 | any} level {auth |
noauth | priv} [read word255] [write word255]
Parameters
Name
Description
group name
32 words
v1 | v2c | v3 | any
V1–v3 security model
ISW Commands
ISW Series Managed Industrial Ethernet Switch Command Reference Guide 99
To Next Page
Loading...
Need help?
General