show running-config feature
Description
Show running configuration feature.
Syntax
show running-config feature feature_name [all-defaults]
Parameters
Name Description
all-defaults
Include all default values.
feature_name
CWORD
Valid values are : GVRP | access | access-list | aggregation | alm_profile | arp-inspection
| auth | clock | dhcp | dhcp-snooping | dhcp_server | dns | dot1x | green-ethernet | http |
icli | ip-igmp-snooping | ip-igmp-snooping-port | ip-igmp-snooping-vlan | ipmc-profile |
ipmc-profile-range | ipv4 | ipv6 | ipv6-mld-snooping | ipv6-mld-snooping-port | ipv6-
mld-snooping-vlan | lacp | lldp | logging | loop-protect | mac | monitor | mstp | mvr |
mvr-port | ntp | phy | port | port-security | pvlan | qos | rmon | snmp | source-guard | ssh
| tring_g1 | tring_g2 | tring_g3 | user | vlan | voice-vlan web-privilege-group-level
all-defaults Include most/all default values
show running-config line
Description
Line information.
Syntax
show running-config line {console | vty} list [all-defaults]
Parameters
Name
Description
list
List of console/VTYs.
all-defaults
Include most/all default values
show running-config vlan
Description
VLAN information.
Syntax
show running-config vlan list [all-defaults]
ISW Commands
ISW Series Managed Industrial Ethernet Switch Command Reference Guide 38
To Next Page
Loading...
Need help?
General