Name Description
description
Specify a description of the event
log
Generate RMON log when the event fires
trap
Generate SNMP trap when the event fires
speed (Ethernet)
Description
Configure gigabit Ethernet speed and Copper/SFP for gigabit port 7–8.
Note
Ports 1–6 Only support copper. They do not support SFP. Ports 9 and 10 only support auto.
Syntax
speed {auto | full-l000mbps | full-100mbps | full-10mbps | half-100mbps |
half-10mbps}
Parameters
Name
Description
auto
Auto negotiation.
full-l000mbps
Set 1000 Mbps full duplexing.
full-100mbps
Set 100 Mbps full duplexing.
full-10mbps
Set 10 Mbps full duplexing.
half-100mbps
Set 100 Mbps half duplexing.
half-10mbps
Set 10 Mbps half duplexing.
speed (interface)
Description
Configure interface speed. If you use 10, 100, or 1000 keywords with the auto keyword the port will
only advertise the specified speeds.
Syntax
speed {10g | 2500 | 1000 | 100 | 10 | auto {[10] [100] [1000]}}
ISW Commands
ISW Series Managed Industrial Ethernet Switch Command Reference Guide 72
To Next Page
Loading...
Need help?
General