EXTREME SWITCHING ISW 4-10/100P User Manual

Name Description
disable
Set the specified Ring group to Disabled
enable Set the specified Ring group to Enabled
node1 interface GigabitEthernet <portNo>}
Description
Set interface of ring protection node
Syntax
node1 interface GigabitEthernet portNo
Parameters
Name Description
portNo
Valid values: 1–max port index.
node2 interface GigabitEthernet <portNo>}
Description
Set interface of ring protection node
Syntax
Node2 interface GigabitEthernet portNo
Parameters
Name
Description
portNo
Valid values: 1–max port index.
role
Description
Set role for group
Syntax
role {ring-master | ring-slave | coupling-primary | coupling-backup |
dual-homing | chain-head | chain-tail | chain-member | b-chain-terminal-1
| b-chain-terminal-2 | b-chain-central-block | b-chain-member}
Parameters
ISW Commands
ISW Series Managed Industrial Ethernet Switch Command Reference Guide 89

EXTREME SWITCHING ISW 4-10/100P Specifications

General

Brand	EXTREME SWITCHING
Model	ISW 4-10/100P
Category	Network Router
Language	English