Ezviz DB2 Pro - Settings; Doorbell Settings; Chime Settings

13
Settings
1� Doorbell
In the settings page, you can set the parameters of the doorbell.
Parameter Description
Name View or tap to customize the name of your device here.
Working Mode You can select one kind of device working modes here.
Intelligent Detection You can select between different detection types for your device.
Notication You can manage the device message and EZVIZ App notication.
Audio Settings You can set relevant audio parameters for your device.
Image Settings You can set relevant image parameters for your device.
Light Settings
When disabled, the doorbell indicator will be off.
Exceptions: The doorbell indicator will still be on, when the doorbell is charging or the doorbell is exception.
Speaker Settings
You can set relevant parameters of your speaker.
Battery You can see the battery remaining capacity here.
Security Settings You can encrypt your videos with encryption password and customize the privacy area.
Network Settings You can see the connection status.
Device Information You can see the device information here.
Share Device You can share the device to you family member or guest.
2� Chime
In the settings page, you can set the parameters of the Chime.
Parameter Description
Name View or tap to customize the name of your device here.
Audio Settings You can set volume and enable the doorbell ring DND mode.
Light Settings When disabled, the device indicator will be off.
Record List You can see the device storage status of the memory card.
Network Settings
You can see the Wi-Fi name and the connection status.
If you want to change your device's Wi-Fi, please hold the [RESET] button for 5 seconds or so to RESET the device.
Device Information You can see the device information here.
Delete Device Tap to delete the device from EZVIZ App.