EasyManua.ls Logo

FAAC 410 MPS - Terminal Connections and Input Signals; STOP Input Configuration Details; Two-Leaf Opening Input (N.O.) Configuration; Photocell Transmitter Power Supply (FSWTX)

FAAC 410 MPS
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
ENGLISH
STOP
Common ( - )
N.C. - STOP contact: all devices (such as pushbuttons)
which by opening a contact stop gate movement.
To install several safety stop devices, connect the N.C.
contacts in series.
N.B. If the STOP devices are not connected, jumper STOP
and - inputs.
Common ( - )
A - TWO-LEAF OPENING (N.O.): all devices (pushbuttons ,
photocells, detectors, etc.) which assures opening/closing
of both leaves by closing a contact.
To install several control devices, connect the N.O. contacts
in parallel.
FSWTX
+ – Photocell transmitter power supply (FailSafe)
To use the Fail-Safe function, power supplies to the photocell
transmitters must be connected.
d J4 quick connector for decoder SL/DS - MINIDEC SL/DS - RP
433 SL/DS cards (figs. 10-11-12-13)
e TORQUE trimmer: thrust adjusting trimmer (anti-crushing
safety system).
f PAUSE trimmer: pause time adjusting trimmer (A/S AD/
logics).
Pause time is adjustable from 0 to 240 seconds.
g OP/CL trimmer: Opening/Closing time adjusting trimmer
Time is adjustable from 0 to 120 seconds.
h LEAF DELAY trimmer: closing leaf delay adjusting trimmer.
Leaf delay time is adjustable from 0 to 28 seconds.
N.B.:
1) If the opening/closing time is less than the set delay
time, the delayed leaf closes at the end of the closing
time.
2) In one-leaf application, set the leaf delay time to
minimum
i Programming microswitches
j Fuse F1 5x20 5 A/250 V rapid (motor power supply)
k Fuse F2 5x20 800 mA/250 V delayed (accessories power
supply)
l Fuse F4 5x20 250 mA/250 V delayed (transformer power
supply)
m Bridge to enable/disable the Fail-Safe (Fig. 14).
n
Bridge to enable/disable the wing opening
delay(Fig. 14).
Table 2 - Current drawn by accessories
MINIDEC
SL/DS
PLUS
433 E
410 MPS
410 MPS
DECODER
SL
Fig. 10
Fig. 11
410 MPS
Fig. 12
Fig. 13
410 MPS
ACCESSORY CURRENT DRAWN
PLUS 40 SL 30 mA
PLUS 433 E 20 mA
MINIDEC SL / DS 6 mA
DECODER SL / DS 20 mA / 55 mA
RP 433 SL / DS 12 mA / 6 mA
DIGICARD 15 mA
METAL DIGIKEY 15 mA
FOTOSWITCH 90 mA
DETECTOR F4 / PS6 50 mA
PHOTOBEAM 50 mA
N.B. Use a dedicated decoder for other accessory types.
Intelligent Security & Fire Ltd.

Related product manuals