FAAC E145 - WARNINGS FOR THE INSTALLER; General Safety Obligations; MEANING OF THE SYMBOLS USED

E145 3 732783 - Rev.E
Translation of the original instructions
ENGLISH
3. PROGRAMMING
BASIC PROGRAMMING
Basic Functions list: Paragraph 3.1.
1. Press F until the first basic function is display-
ed. (each function code remains displayed as long
as the F button is pressed).
2. Release: The function value is displayed (default
or other programmed one).
3. Use buttons
+
or
-
to modify the value.
4. Press F to confirm the displayed value. Move to
the next function. The modified value becomes
effective immediately.
Proceed in the same way for all functions. The last
(
St) closes programming.
5. In
St select Y or no with buttons
+
or
-
:
-
Y = save new programming
-
no = does NOT save new programming
6. Press F to confirm and close. Go back to auto-
mation STATUS.
F
F
-/ R2
+/ R1
F
ADVANCED PROGRAMMING
Advanced Functions list: Paragraph 3.2.
1. Press and hold F and
+
as well, until the first advan-
ced function is displayed. (each function code
remains displayed as long as the F button is pres-
sed).
2. Release: The function value is displayed (default
or other programmed one).
3. Use buttons
+
or
-
to modify the value.
4. Press F to confirm the displayed value. Move to
the next function. The modified value becomes
effective immediately.
Proceed in the same way for all functions. The last
(
St) closes programming.
5. In
St select Y or no with buttons
+
or
-
:
-
Y = save new programming
-
no = does NOT save new programming
6. Press F to confirm and close. Go back to auto-
mation STATUS.
F
+
+/ R1
F
+
+/ R1
-/ R2
+/ R1
F
To EXIT the programming at anytime:
- press and hold F and then also
-
to switch directly to St.
F
+
- / R2